Global PV installations to grow by 21% in 2012

Global solar PV installations will grow by at least 3.5% and up to 21% in 2012, according to a new report from IMS Research.

04/04/2012


Global solar PV installations will grow by at least 3.5% and up to 21% in 2012, according to a new report from IMS Research, recently acquired by IHS Inc. The market analyst firm forecasts that despite incentive cuts in most of the world’s largest markets, global installations will grow from 26.9 GW in 2011 to between 27.8 GW and 32.6 GW in 2012, with Europe’s share of installations falling from 69% last year to 50% this year.

IMS Research’s Q1’12 PV Demand Database, which tracks installations in more than 60 countries, revealed that new PV installations reached 26.9 GW in 2011 and its most-likely forecast shows this growing to 27.8 GW this year. (Note that figures are for installations and not grid connections; the figure for grid connections in 2011 would be much higher.) Ash Sharma, Senior Research Director for Photovoltaics, commented, “Despite many in the industry still expecting further doom and gloom, we in fact see a pick-up in demand driven by falling system prices, a rush to  beat incentive cuts, and the growing number of mid-sized emerging PV markets.”

Global PV Installations - Conservative, Most-Likely, and Optimistic Scenarios. Source: IMS Research's Q1'12 PV Demand Database

The new report’s ‘optimistic forecast’ shows installations growing by 21% to 32.6 GW this year. “It is no longer a case of whether the PV market will grow in 2012, the real question now is by how much will it grow,” Sharma explained. “When you only consider a handful of countries like Germany, Italy and France, it’s easy be pessimistic about demand; however, when you look further afield and analyse demand from 60 countries, the picture becomes much more positive.”,.

According to the Q1’12 report, at least 23 counties will install 100 MW or more this year, up from just 17 last year. “It is this geographic diversification that will help drive growth in global PV installations this year as the market becomes less dependent on just one or two markets. Ultimately it will also lead to stability for the industry in the longer term as the impact of a single country’s policy will weaken,” added Sharma.

PV Installation Forcase by Major Region. Source: IMS Research's Q1'12 PV Demand Database

Germany, however, is still predicted to remain the largest and most important PV market this year and despite the overhaul to its FiT policy, new installations are predicted to reach at least six GW this year and up to 8.5 GW is even possible. Such a result would have been almost unthinkable a few months back, but IMS Research found that demand in Q1 was extremely high in a rush to beat the incoming changes.

Although Germany will remain the largest market, IMS Research predicts that China will become the second largest, followed closely by Italy. “China remains one of the most unpredictable factors in the global supply and demand balance. With European demand faltering, the Chinese government is under increased pressure to accelerate domestic deployment to support its huge manufacturing base. Installations of up to eight GW would be unlikely in China this year, but still a possibility,” concluded Sharma.

Detailed analysis of PV installations in more than 60 countries is available from IMS Research’s quarterly PV Demand Database.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.