Baldor to sell ABB low-and-medium voltage motors

Baldor has agreed to sell ABB motors. This allows Baldor to sell a wider offering of motors that meet worldwide standards, especially for hazardous conditions.

08/01/2011


Baldor Electric Company, a manufacturer of industrial electric motors, drives, mechanical power transmission products and generators, is now selling and supporting the complete line of ABB low- and medium-voltage industrial electric motors and generators. This allows Baldor to offer local customers NEMA and IEC motors to fit all global requirements, including motors that meet requirements for hazardous locations. The Baldor electrical sales force will also represent the ABB line of synchronous and induction generators used around the world in wind power, diesel, gas and steam power applications.

“Offering the ABB motors and generators through the Baldor electrical sales force will better serve our customers in the U.S., Canada and Mexico, making it easy to order the motor you need, no matter what standards are required,” said Tracy Long, Baldor vice president of marketing. “This gives all ABB and Baldor customers in North America access to the world’s largest manufacturer of industrial electric motors from a single, local sales team,” Long stated. “Just a few months ago, our motor range was from fractional to 15,000 HP. Now the range has been extended to 100,000 HP along with a full line range of IEC metric motors.”

“Our local presence and the experienced staff from both ABB and Baldor will serve our customers needs better than ever before,” said Randy Colip, Baldor executive vice president of sales. “Plus, customers will continue to be supported by both ABB and Baldor technical staff at all the factory locations,” Colip said.

www.baldor.com 

Baldor Electric Company

www.abb.com 

The ABB Group

- Edited by Chris Vavra, Control Engineering, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me