Explosion-proof mini LED

The EXHL-TRN-LE1-LV mini explosion-proof light produces 1,320-lumens of high-intensity light for illuminating within hazardous areas and potentially explosive work environments.


The EXHL-TRN-LE1-LV mini explosion-proof light produces 1,320-lm of high-intensity light for illuminating within hazardous areas and potentially explosive work environments.Courtesy: Larson ElectronicsThe EXHL-TRN-LE1-LV mini explosion-proof light from Larson Electronics produces 1,320 lumens of high-intensity light for illuminating within hazardous areas and potentially explosive work environments. This unit is designed to withstand the rigors of demanding environmental and operating conditions. It can operate in temperatures of -40°C to 60°C, is waterproof to 3-m, and resists ingress of dust, dirt, and humidity. The light fixture is offered in a choice of spot- or flood-beam configuration and operates on 12 or 24 Vdc. It is also designed with an adjustable surface-mount bracket for seamless control. The adjustable flat-surface bracket has two set screws on the bracket for loosening, adjusting the light's tilt orientation, and re-tightening to hold the luminaire in position. A single through-hole mounting bolt allows operators to adjust the rotation of the fixture by loosening one bolt. Terminal strips inside the fixture allow the operator to make electrical connections. The wiring is fed through rigid pipe to the ¾-in NPT hubs on either side of the fixture and ties in to the fixture's terminal strips.

Larson Electrionics


Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Developing lighting solutions; Designing lighting systems; Integrating fire alarm and HVAC systems
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me