Arc fault protector

The Arc Vault from GE stops an arcing fault in less than 8 msec to provide increased arc flash hazard mitigation with equipment doors open or closed. The system will feature an activation switch that can be used during routine maintenance to put the low-voltage equipment into a high-protection mode. When an arc flash occurs, the system send a signal to the arc containment device and the arc is ...

April 1, 2010

The Arc Vault from GE stops an arcing fault in less than 8 msec to provide increased arc flash hazard mitigation with equipment doors open or closed. The system will feature an activation switch that can be used during routine maintenance to put the low-voltage equipment into a high-protection mode. When an arc flash occurs, the system send a signal to the arc containment device and the arc is then diverted to the containment system in less than

www.geindustrial.com #1