What will a Smart Grid in India look like?

The recent widespread power failures in India have highlighted a number of problems that exist in the electrical grid throughout the country.

08/02/2012


IHS has acquired IMS ResearchThe recent widespread power failures in India have highlighted a number of problems that exist in the electrical grid there. A report from IMS Research (recently acquired by IHS Inc.) on Distribution Automation Equipment – 2012 Edition analyzes the regional differences between distribution automation adoption globally, including developing countries such as India, and what role smart grid technologies will play in helping to solve these problems.

India’s recent power outage problems are more basic than smart grid. The key concern for India is inadequate generation capacity, as well as the shortage of coal for existing power plants. Using centralized generation alone, India’s government has struggled to provide enough power to a growing population and economy. IMS Research analyst Nicole Juarez commented: “India’s main concern continues to be installing ‘lights on’ infrastructure to increase electrification rates or to keep up with rising electricity consumption. This is evident when reviewing expenditure on smart grid enabling electronics (including capacitor controls, voltage regulator controls, switch control modules, digital protective relays, etc.) in distribution applications, where investment from countries in Asia is relatively low when compared to other regions globally. However, when taking into account investment in heavy metal equipment (including switchgear, capacitor banks, voltage regulators, circuit breakers, etc.) Asia is estimated to account for over 60% of global revenue.”

Smart grid, and specifically distribution automation, is  typically thought of  as a complex, interconnected system with communications and networks which support “applications,” like volt/VAR optimization and fluid demand-response. These smart grid applications are not underway and may not even be appropriate for most of India. Instead, India’s home and small business owners are installing their own small generators, and the utility grid operators have increased their use of sensors around the grid to help them monitor problems, find trouble spots, predict failures and respond quickly. “Over the past couple years, India has invested heavily in monitoring of the distribution network in the form of power meters, line monitoring devices and fault detectors which allow utilities to help minimize non-technical losses, or theft, and highlight problematic areas,” adds Juarez. According to Distribution Automation Equipment – 2012 Edition, power meters, line monitoring devices, and fault detectors in Asia accounted for an estimated $58 million in sales in 2011 and are projected to grow to almost $92 million annually by 2017. These may not be interconnected, high-bandwidth, distributed intelligence smart grid applications that are the focus of discussion in the United States or Europe, but they are solving existing problems to support today’s growth.

Juarez continued: “Moving forward, it will be interesting to see how India copes with continuously increasing demand for electricity. With shipments of smart meters expected to begin in earnest within the next five years, additional applications and more sophisticated smart grid solutions will become applicable in India. However, investment will remain strong in the short term for heavy metal and sensing equipment, in efforts to electrify the country while limiting blackouts, theft, and technical losses.”

Juarez concluded: “Currently in India, individuals and merchants take a large share of the responsibility in keeping the power on, with a strong example being the distribution of diesel gensets throughout the country. Given this established pattern, it might not be much of a leap to envision distributed renewable generation taking off in the not so distant future in India. And when realizing that centralized generation will not be invested in enough to meet forecasted demand, then this assertion makes even more sense.”



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.