Scroll compressors

ORBIT 6 compressors are suitable for air conditioning systems and heat pumps.

04/08/2015


BITZER’s ORBIT 6 and 8 scroll compressors provide high isentropic efficiency and their excellent energy efficiency.The five models in the ORBIT 6 series offer a delivery rate of between 840 and 1620 CFH (60 Hz). With a cooling capacity of between 137 and 261 kBtu/h at 60 Hz, they are suitable for air conditioning systems and heat pumps. The compressors have a delivery rate of between 1260 and 3300 CFH (60 Hz), achieve high efficiency rates, and their operating noise levels are up to 3 dB(A) lower than comparable compressors. BITZER has developed the compressors for use in water-cooled chillers for systems with low saturation discharge temperatures, and are equipped with permanent magnet motors. They have been designed for use in air conditioning systems, heat pumps, and in individual, short circuits. The semi-hermetic ECOLINE reciprocating compressors, with the CRII capacity control, can be flexibly set to 10% to 100%. BITZER's semi-hermetic CO2 reciprocating compressor for sub-critical and trans-critical cycle applications have delivery volumes between 56 and 1998 CFH, and for the trans-critical cycle series, it is between 183 and 1092 CFH.

Bitzer

www.bitzer.de



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me