Ratings classification for power generation systems

The Data Center Continuous (DCC) rating by Cummins Power Generation applies to the 50 and 60 Hz generator set configurations.


The Data Center Continuous (DCC) rating by Cummins Power Generation applies to their 50 and 60 Hz generator set configurations. Courtesy: Cummins Power GenerationCummins Power Generation’s Data Center Continuous (DCC) rating offers diesel generator sets rated for unlimited hours of operation, with no restrictions on average variable load factor. DCC ratings will be applicable for any data center installation where a reliable utility exists. The Data Center Continuous ratings span the range of Cummins Power Generation’s high-horsepower diesel generator sets, from 1 to 2.5 MW, and will apply to both 50 and 60 Hz configurations. This introduction is part of Cummins’ overall focus on data center innovation, marshalling a team of global experts and lifecycle support resources specifically for its data center customers. Cummins DCC ratings can be applied up to the specified rating without restrictions on varying or nonvarying loads or hours of operation. The new ratings are in addition to the current emergency standby and prime power ratings. 

Cummins Power Generation


No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.