Ground fault protection circuit breakers

Eaton Corp. has expanded its circuit breaker capabilities to offer enhanced ground fault protection and nonfused current-limiting breaker modules for the Series G circuit breakers with the release of the Earth Leakage Modules and the current-limiting breaker modules.

01/19/2011


Eaton Corp. has expanded its circuit breaker capabilities to offer enhanced ground fault protection and nonfused current-limiting breaker modules for the Series G circuit breakers with the release of the Earth Leakage Modules and the current-limiting breaker modules. Equipped with a built-in sensor and ground fault relay, Eaton’s Earth Leakage Modules are designed to protect against equipment damage and increase personnel safety by limiting current. Additionally, the current-limiting breaker modules are designed to meet the increasing capacity of electrical source, providing increased fault currents. They provide advanced system protection during overloads and both low- and high-level short circuits.

Eaton’s current limiter module provides automatic reset after interruption, unlike fused current limiters with a one-time use. Eaton manufactures nonfused current limiting modules in combination with Series G E-Frame breakers with interrupting capacities up to 150 kA at 480 Vac.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me