Double-drop elbow fittings

Viega's ProPress double-drop elbow fittings are designed with a single fitting that incorporates two flow paths and keeps water close to each fixture.

11/23/2015


Viega's ProPress double-drop elbow fittings are designed with a single fitting that incorporates two flow paths and keeps water close to each fixture. Courtesy: ViegaViega's ProPress double-drop elbow fittings are designed to keep water close to each fixture and maintain water quality by reducing stagnation. They are available in ½- and ¾-in. sizes. The flow-through-style fittings are designed with threaded fixture connections and integrated mounting brackets, and are used in series or ring installations as well as in hot- or cold-water systems. Flow-through fittings allow the use of a single fixture to generate flow through many fixtures up to the point of connection. The system minimizes dead legs between tees and wall penetrations.

Viega

www.viega.us



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me