Federal Budget Increase for Solid State Lighting Program


The National Electrical Manufacturers Assn., among others, is lending strong support to a provision in the Bush administration’s proposed FY 2007 budget that would spur the development of state-of-the-art lighting technology. The budget includes an $8 million increase for solid state lighting research and development.

“The fact that the administration would provide an increase in funding for this program, while recommending cuts in others,” said NEMA President Evan Gaddis, “speaks volumes about the importance of high-quality, high-efficiency lighting to our nation. Improved lighting systems in our nation’s buildings and homes represent one of the greatest opportunities we have to save energy and ultimately reduce our dependence on foreign oil supplies.”

The solid state research and development program, operated in partnership between the Dept. of Energy and the NEMA-operated Next Generation Lighting Industry Alliance (NGLIA), provides funding for competitively selected proposals—in both basic technology and product development—of new, advanced lighting using light emitting diodes and organic light emitting diodes.

Solid state lighting is already seen in niche applications. The challenge is to improve product performance and overcome various technical barriers so that it can move into general lighting thereby displacing today's inefficient light sources. The energy thus saved is estimated at six to seven percent of total national energy usage. According to a NEMA spokesperson, 22% of U.S. electrical power is consumed by lighting.

This budget increase from last year's requested $11 million to $19.3 million for 2007 will promote the acceleration of technical work needed to realize the potential of solid state lighting. NEMA and the NGLIA will be working with Congress as it considers the administration's request for this important program.

For more information on the NGLIA and the importance of solid state lighting, please visit www.nglia.org .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me