Controlled chilled-beam pump module

Neuton eliminates the expense of a separate chiller, boiler, and secondary water distribution system associated with conventional chilled-beam HVAC designs.
By Semco April 14, 2016

Neuton eliminates the expense of a separate chiller, boiler, and secondary water distribution system associated with conventional chilled-beam HVAC designs. Neuton blends and recirculates return water within its zone to convert typical 42 and 140°F primary loop water temperatures to optimal 58 or 100°F chilled-beam discharge temperatures. This prevents cooling-mode condensation and heating-season heat stratification. Neuton can control up to 10 chilled beams, depending upon the water flow rate required. Using a controlled chilled-beam pump module design versus a traditional chilled-beam layout reduces job piping material/labor costs by up to 35%.

Semco

www.semcohvac.com


This product is a Finalist in the
Consulting-Specifying Engineer 2016 Product of the Year program. View more Finalists and cast your vote at www.csemag.com/votepoy (voting closes June 30, 2016).