Transfer and bypass/isolation switches

Bypass/isolation switches are available in load-break or no-load-break bypass.

05/02/2016


Bypass/isolation switches are available in load-break or no-load-break bypass. Courtesy: RusselectricRusselectric's transfer switches and bypass/isolation switches are UL 1008 tested, listed, and labeled 3- and 30-cycle close- and withstand-rated transfer switches and bypass/isolation switches. RTS-30 switches simplify selective coordination, while RTS-03 3-cycle switches offer close and withstand ratings. Both 3- and 30-cycle switches are available for open- or closed-transition transfer. Bypass/isolation switches are available in load-break or no-load-break bypass. Open-transition switches are available with single or dual operators with positive mechanical interlocking. They can be used in applications involving high inductive loads. Dual operator switches can be configured with an adjustable time delay between the opening of closed contacts and closing of open contacts to allow large motor loads to demagnetize before transfer.

Russelectric

www.russelectric.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me