ASPE plumbing design exam registration open

The CPD exam, administered by the American Society of Plumbing Engineers, is the official certification program for engineers and designers of plumbing systems. The exam is scheduled for April 19 and 20, 2012.

01/18/2012


The 2012 Certified in Plumbing Design (CPD) examination will be held at testing sites across the country on April 19 and 20, and registration is now open online at aspe.org/CPDCertification.
 
Administered by the American Society of Plumbing Engineers (ASPE), the CPD program is the international certification program for engineers and designers of plumbing systems. Completion of the CPD program and examination confers upon the successful candidate the designation Certified in Plumbing Design (CPD).
 
To be eligible to take the CPD examination, a candidate must have:

1. A baccalaureate degree in a field related to engineering, and

2. A minimum of four years of practical experience in a position of responsibility for the design of plumbing systems.

If a candidate lacks an accredited degree, they may substitute up to an additional four years of practical experience in the design of plumbing systems, for a total of eight years. They can also be granted a credit of one-half year of practical experience for each full year of education in an accredited curriculum related to plumbing engineering.

The examination consists of 100 multiple-choice questions in five job dimensions: gathering information, administration, design, specifications, and construction services.

After passing the CPD exam, individuals will have to renew their accreditation every two years. Further details can be found on the link above.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me