AHR Expo Innovation awards

The AHR Expo Innovation Awards competition will mark its 10th anniversary at the Chicago show Jan. 23-25, 2012.

08/02/2011


Widely recognized as one of the most prestigious honors in the HVACR industry, the 2012 AHR Expo Innovation Awards competition will mark its 10th anniversary at the Chicago Show on Jan. 23-25, 2012. Entries must be received by Sept. 19, 2011.

Created in 2002 by ASHRAE, AHRI, and AHR Expo, the awards program was designed to recognize the most innovative and useful products among the thousands on display at the AHR Expo. Entries submitted by exhibitors each year are judged on the basis of innovative design, application, market impact, and value to the HVACR industry. The awards are also meant to promote and encourage new product development in 10 major categories:

  • Building Automation
  • Cooling
  • Green Building
  • Heating
  • Indoor Air Quality (IAQ)
  • Refrigeration  
  • Software  
  • Tools + Instruments  
  • Ventilation
  • Plumbing.

Winners of the Innovation Awards will be recognized at an awards ceremony during the show in Chicago and will receive special placards to place in their booths, as well as an etched crystal award to be displayed in their company headquarters. In addition, one of the ten winning entries will be selected as the 2012 AHR Expo Product of the Year. Exhibitors can submit one product per category, but AHR Expo Innovation Award winners from the previous year cannot resubmit the same product.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me