Letters to the Editor

Not everyone sold on the benefits of UFADThe January article on underfloor air distribution ("Undervalued?" Jan. 2002, p. 28) raised a question: "... whether this is a legitimate trend or a case of a client or designer falling in love with a particular technology?" and then very strongly answered it for me.


Not everyone sold on the benefits of UFAD

The January article on underfloor air distribution ("Undervalued?" Jan. 2002, p. 28) raised a question: "... whether this is a legitimate trend or a case of a client or designer falling in love with a particular technology?" and then very strongly answered it for me.

I have designed HVAC systems for over 35 years, and I can say without hesitation that UFAD is strictly a case of puppy love. It is great for data centers and probably for a few rare other cases, but not for general applications. I can rebut every advantage stated, except for the comments as they relate to data centers. For example, how do we reduce the supply air volume by using 63°F air? How do we do latent cooling with 63°F? How does UFAD reduce chiller capacity? How do we do away with the ceiling and still take care of the return and exhaust? How does UFAD reduce equipment costs unless we sacrifice control—which is where we were with the original VAV designs?

Fortunately, the P.E.'s comments in the article were based mostly on engineering reality, and not on "what's in fashion this year."

DAVIE LLOYD, P.E., Askew Hargraves Harcourt & Assocs. Memphis, Tenn.

Where's the fire?

Several important issues relating to fire and life safety were not discussed in the "Undervalued?" (Jan. 2002, p. 28) underfloor air distribution article:

  • Section 607 of the Uniform Mechanical Code regulates the use of underfloor space as an HVAC supply plenum in single-family residences only. The code does not regulate, nor does it address under-floor supply plenum in other types of occupancies, such as office buildings.

  • If it is proposed to use a raised access floor system as a supply plenum—in an office building, for example—an alternate method of design (equivalency) is required to be submitted to the Authorities Having Jurisdiction.

  • The flexibility provided by a raised access floor may be affected by the provision of required fire-rated corridors, or by separations that are required to be continuous through the raised-floor space.

JOHN YOUNGHUSBAND, Project Director, Schirmer Engineering El Segundo, Calif.

Hidden costs

As a manufacturer of cellular floors— a competitive system to access floor systems—I felt compelled to ask your roundtable panel ("Wiring Underfloor, Not Underfoot" Jan. 2002 p. 24), who generally praised access-floor systems as ideal for delivering electrical wire and conditioning air, the following:

  • How do you handle the possibility of a fire spewing toxic gases out of the access-floor plenum at workstation occupants?

  • Is fire detection and suppression equipment necessary for plenums that contain large amounts of combustible, plastic-coated cables?

  • Should access floors be covered by the NEC?

  • Are abandoned cables as dangerous in access floors as they are in ceiling plenums, and should they be removed?

  • In shallow, non-adjustable floors, how do you achieve and maintain a level floor? Can shims be used under pedestals or will they fall out of place?

In addition, just to be certain I have it right, let me review what makes a good access-floor installation:

  • First, build a shell with heavier beams, girders and foundations to carry the extra dead load of the access floor and extra height dead load.

  • In the shell, elevate the rest rooms, elevator lobbies and other areas that will not have the access floor system.

  • Install the access floor and the higher-cost carpet squares it requires.

  • Add a cable tray or duct system for cable management.

  • Lay steel conduit, as required by code, for all live-power wires.

  • Add smoke detection.

  • Add a sprinkler or halon system under the floor—optional, but highly recommended if large amounts of cabling are anticipated.

Now what does this all cost? Please excuse the sarcasm, but I'm frustrated reading article after article praising access floor.

On top of the cost, combustible plastic coated cables are a fuel for fires and their unlimited use under access floors and in ceiling plenums is recognized as a severe life-safety threat. Are you aware that NFPA and NEC are now mandating the removal of abandoned cable in ceiling and access floor plenums?

In my opinion, life safety, not convenience, flexibility or scalablity is—and must be—the primary design issue for architects and engineers.

I agree with some of what the panel expressed, and access floor is an "ideal" system if money is no object. But I find that it is, and in such cases more conventional air and wire-delivery systems can often outperform an access floor.

JOHN J. MICHLOVIC, P.E., Centria/H.H. Robertson Floor Systems Ambridge, Penn.

Editor's Reply: The questions raised in the preceding letters are indeed valid and form a good basis for future discussions of underfloor systems in the magazine. In fairness to our panelists, they could only answer the questions we asked.

Have something to say?

Send your comments to:

"Letters to the Editor"

c/o Jim Crockett

Consulting-Specifying Engineer

2000 Clearwater Drive

Oak Brook, IL 60523

Or email to: jcrockett@cahners.com

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me