Hydronic boilers

NH150-DV and NH199-DV tankless hydronic boilers from Noritz.

04/17/2012


The NH150-DV and NH199-DV tankless hydronic boilers from Noritz are available for constant room temperature comfort for various heating choices, such as panel radiators, baseboard flooring, and radiant floor heating. Significantly smaller in size than conventional hydronic boilers, the direct-vent units appear similar to tankless water heaters and weigh only 66 lbs versus a conventional boiler at 300 lbs. Featuring a gas-consumption range of 55,500 Btu/h to 150,000 Btu/h for the NH150-DV and up to 199,900 Btu/h for the NH199-DV, the units are ideal for residential or light commercial applications. They also offer nine temperature settings (140 to 180 F) for hydronic heating applications. Each unit has a high-flow capacity of 14 gpm with a three-speed Grundfos Pumps circulator, providing multiple pump curves, rather than the one-pump curve of a typical single-speed pump. The units also include an outdoor reset control. 

Noritz

www.noritz.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me