Condensed boiler

Cleaver-Brooks' ClearFire-C is a condensing boiler available up to 3,300 MBTU.

02/28/2012


Cleaver-Brooks’ ClearFire-C is a fully condensing boiler is now available up to 3,300 MBTU. The ClearFire-C is a fully condensing hot water boiler that features a pre-mix, down-firing burner and patented AluFer advanced heat transfer tubes. This advanced boiler design achieves efficiencies up to 99% and NOx levels to less than 20 ppm. The modulating pre-mix burner on the unit automatically adjusts the air/gas mixture for maximum efficiency. The linkageless burner provides up to 5:1 turndown. The boiler features dual temperature water returns, which can increase efficiency by up to 5%. The extended heating surface and corrosion-resistant properties of the AluFer tubes ensure enhanced heat transfer and peak condensing performance. The ClearFire-C comes with the Falcon touch-screen total boiler control and is easy to operate via the standard ModBus control protocol. 

www.cleaverbrooks.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me