Airtec Butterfly Damper features built-in, virtually airtight, permanent gasket

Airtec’s Butterfly Damper is made of a corrosion-proof polymer, offers built-in permanent gasket, helps reduce off-season drafts, mold-generating condensation on diffusers

01/20/2011


Airtec Products Corp., Fall River, Mass., a leading manufacturer and importer of HVAC/R products, offers the Airtec Butterfly Damper, reportedly the HVAC industry’s only damper with a built-in, virtually airtight permanent gasket for residential and commercial ventilation systems. The nearly 100-percent efficient performance of the Airtec Butterfly Damper also helps prevent off-season condensation.Airtec Butterfly Damper

Available in Airtec’s MV and GRD Series diffusers, the durable polymer damper features a rubber gasket that when purportedly shut off, allows virtually no air passage, according to airflow tests. Made-in-the-USA at Airtec’s new multi-million dollar plant addition, the Airtec Butterfly Damper allegedly answers contractor requests for a corrosion-proof, efficient alternative to inefficient metal butterfly, opposed blade and parallel blade damper methods.

Besides efficiency, the limited air movement from a tight, closed damper in idle ducts also prevents condensation that can drip through duct gaps and diffusers or nourish harboring ductwork bacteria such as mold and mildew.

The patented Airtec Butterfly Damper comes with an easy-to-adjust worm-gear mechanism. An accessible handle allows hand adjustments or it can be removed in public areas to provide authorized access only with a flat blade screwdriver.

Other damper features are:

  • Outperforms other industry dampers, but carries a similar cost due to a proprietary over-molding process.
  • Offers a one-year warranty.
  • Prevents off-season drafts.
  • Available in two sizes for the six and eight-inch MV Series of ceiling diffuser; and eight-inch in GRD Series diffusers.

Airtec Diffusion Products (PDF)



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.