Electrical Equipment for Hazardous Locations Standards Updated


Three of the eight International Electrotechnical Commission (IEC) 60079 series-based ISA/UL co-published standards are being revised based on the new editions of the IEC standards. One of these standards, ISA 60079-0 (12.00.01), Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations: General Requirements, is scheduled for publication this month after it has been submitted for a 10-day default ISA Standards & Practices Board ballot and for ANSI approval.

This standard specifies the general requirements for construction, testing and marking of electrical apparatus and Ex components intended for use in Class I, Zone 0, 1, or 2 hazardous (classified) locations as defined by the National Electrical Code, ANSI/NFPA 70.

ISA 60079-1 (12.22.01), Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof "d", and ISA 60079-18 (12.23.01), Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Encapsulation "m", are also being revised and balloted based on IEC standard updates and are scheduled to be published this year after ballot completion and ANSI approval.

ANSI/ISA 60079-0 (12.00.01) and the other ISA 60079 series standards help to ease global trade of U.S.-manufactured electrical equipment for use in explosive atmospheres. Among the benefits these standards offer U.S. manufacturers are reduced testing and certification costs and reduced time to market.

The ISA standards are harmonized to the fullest extent possible, by ISA's SP12 Electrical Equipment for Hazardous Locations Committee, with the IEC 60079 standards. In the U.S., the standards require all electrical equipment to meet requirements for shock and fire hazards, whereas the IEC 60079 series standards do not focus entirely on explosion hazards.

These standards are essential for industries that have electrical equipment installed in hazardous (classified) locations and/or use electrical equipment to detect, alarm or otherwise process signals relating to the detection of materials within their combustible ranges. The standards were developed to promote and ensure safe and practical use of such electrical equipment.

For more information go to www.isa.org .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Developing lighting solutions; Designing lighting systems; Integrating fire alarm and HVAC systems
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me