Vince Rea appointed to NFPA Codes and Standards committee

TLC Engineering for Architecture's Vince Rea, a senior electrical engineer, was named to the NFPA's Codes and Standards Electrical Section.

10/18/2011


Vincent Rea, who was recently appointed to the NFPA Codes and Standards Committee.Vince Rea, a principal and senior electrical engineer in the Healthcare Division of TLC Engineering for Architecture, has been appointed to the National Fire Protection Assn. (NFPA) Codes and Standards Committee Electrical Section.

The committee’s Electrical Section is responsible for monitoring NFPA documents 37, 70, 70B, 70E, 72, 75, 77, 110, 111, 115 & 780. As a member, Vince will review the Reports on Proposals (ROP’s) and the Reports on Comments (ROC’s) and advise the entire committee about any issues that would positively or negatively impact healthcare physical environment.

Vince is a registered professional engineer and a U.S. Green Building Council LEED Accredited Professional with a credential in building design and construction. With more than 25 years of experience in hospital electrical design, construction and project management, he understands how code changes could affect healthcare electrical design, day-to-day hospital functions, sustainable hospital design and other issues that could impact patient safety and well being.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me