Dewberry promotes two to senior associate

Dewberry has promoted Mark Heinrich, PE, LEED AP BD+C, and Brian M. Tanner, PE, CEM, CxA, LEED AP BD+C to senior associate in its Fairfax, Va., office.

11/09/2012


Mark Heinrich, PE, LEED AP BD+C, based in Dewberry’s Fairfax office, has been promoted to senior associate. Courtesy: DewberryMark Heinrich, PE, LEED AP BD+C, based in Dewberry’s Fairfax office, has been promoted to senior associate. Heinrich has more than 16 years of experience in the design and project management of mechanical, electrical, and plumbing (MEP) systems within multiple types of commercial projects, including office and residential buildings, retail spaces, restaurants, fitness centers, telecommunications spaces, institutional facilities, central utility plants, and medical facilities. Heinrich received a bachelor’s degree in mechanical engineering from Virginia Polytechnic Institute and State University and is a registered professional engineer in Virginia, Maryland, and the District of Columbia. Heinrich is also a member of the National Council of Examiners for Engineering and Surveying, the U.S. Green Building Council, and the American Society of Heating, Refrigeration, and Air Conditioning Engineers. 

Brian M. Tanner, PE, CEM, CxA, LEED AP BD+C, based in Dewberry’s Fairfax office, has been promoted to senior associate. Courtesy: DewberryBrian M. Tanner, PE, CEM, CxA, LEED AP BD+C, based in Dewberry’s Fairfax office, has also been promoted to senior associate. Tanner’s expertise lies with the design and project management of mechanical, electrical, and plumbing systems for high-rise base building, tenant, and renovation projects. During his more than 16 years of experience, Tanner has managed the coordination of more than ten million square feet of these MEP projects. Projects include high-rise office buildings, high-rise residential, and mixed-use facilities. He received a bachelor’s degree in mechanical engineering from Virginia Polytechnic Institute and State University, and is a member of the U.S. Green Building Council, American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE), American Society of Energy Engineers, and National Society of Professional Engineers. In addition he served as president of the National Capital Chapter of ASHRAE in 2006-2007.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me