Cx Giants make their mark

The 2014 Commissioning Giants had several new entries this year. The 15 firms reported a total of more than $351 million in revenue dedicated to commissioning new buildings or retro-commissioning existing buildings.

10/20/2014


The 2014 Commissioning Giants had several new entries this year. The 15 firms reported a total of more than $351 million in revenue dedicated to commissioning new buildings or retro-commissioning existing buildings. Courtesy: Consulting-Specifying EngineerThe 2014 Commissioning Giants had several new entries this year, namely because some firms did not report any commissioning revenue when they submitted data in early 2014, and because Consulting-Specifying Engineer opted to expand the list to the top 15 firms. The 15 firms reported a total of more than $351 million in revenue dedicated to commissioning new buildings or retro-commissioning existing buildings.

Among all 2014 MEP Giants, 1,362 projects were commissioned by a third party, with each of the 102 firms listed averaging 13 projects commissioned by a third party. Overall, 8% of the percentage of design revenue for all firms came from commissioning projects, up 1% from 2013 data.

Cx Giants not listed last year include: AECOM Technology Corp., GLUMAC, Syska Hennessy Group, Stanley Consultants, Aon Fire Protection Engineering Corp., Affiliated Engineers Inc., RMF Engineering, AKF Group LLC, and Vanderweil Engineers.



MORE RESEARCH

58% of engineering firms are always or frequently using closed lighting specifications that include multiple sources; only 23% use closed specifications with one source: Source: Consulting-Specifying Engineer 2014 Lighting and Lighting Controls Study

Top 3 electrical or power system qualities. Courtesy: Consulting-Specifying Engineer$2.8 million: Average dollar amount of HVAC and BAS products specified for new and existing buildings. Source: Consulting-Specifying Engineer 2013 HVAC and Building Automation Systems Study

67% of engineers involved in fire and life safety systems indicted the subjective interpretation of regulations by code authorities as a top challenge to their designs. Source: Consulting-Specifying Engineer 2014 Fire & Life Safety Study

 


More research
On a quarterly basis, Consulting-Specifying Engineer surveys its audience based on four main topics: fire and life safety, electrical and power, lighting and lighting controls, and HVAC and building automation systems. All of the reports are available online, free for a limited time, at www.csemag.com/research.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me