Some fluorescents given 2-year reprieve

The Dept. of Energy has post-poned the "phase-out" date to July 14, 2014, for three T-8 general-service fluorescent lamps (GSFLs) after exception requests were filed by three companies.


Responding to three individually filed exception requests, the U.S. Dept. of Energy (DOE) has postponed by two years – to July 14, 2014 – the “phase-out” date for 700-series T-8 general-service fluorescent lamps (GSFLs) manufactured by GE Lighting (GE); OSRAM SYLVANIA, Inc. (OSI); and Philips Lighting Company (Philips). Only companies that have been excepted by DOE may continue to manufacture or import the T-8 GSFLs in question beyond July 14, 2012. The lamps involved are the 4-foot medium bi-pin, 2-foot U-shaped, 8-foot Slimline, and 8-foot high-output 700-series T-8s. 

DOE’s Office of Hearings and Appeals (OHA) granted the extensions to GE, OSI, and Philips, all three of which are National Lighting Bureau sponsors. The basis for the exceptions was the growing scarcity and escalating cost of the rare-earth oxides used to manufacture the phosphors intrinsic to the proper functioning of fluorescent lamps. The severe supply/cost difficulties have been caused by manufacturing and export regulations subsequently instituted by China. According to the DOE OHA ruling, “China now controls approximately 97% of the world-wide supply of rare earth elements and rare earth oxides, and has adopted policies that have drastically reduced the volumes of rare earth elements and oxides that can be exported to U.S. lighting manufacturers.” 

The impact of China’s rare-earth market manipulations is underscored by a National Electrical Manufacturers Association (NEMA) report that world prices for terbium increased at an annual rate of more than 400% in 2011; for europium oxides, the 2011 escalation rate exceeded 500%. 

According to National Lighting Bureau Chair Howard P. Lewis (Lighting Alternatives, Inc.), the Illuminating Engineering Society of North America’s (IES’) representative on the Bureau board of directors, had the 700-series T-8 phase-out been allowed to take effect on July 14, 2012, 800-series T-8s would have been among the most logical alternatives. The cost of 800-series T-8s exceeds that of 700-series T-8s because the rare-earth content of 800-series T-8s significantly exceeds that of 700-series T-8s. Mr. Lewis observed that, “This ruling enhances affordability at a time when it’s needed. We applaud DOE for its good judgment, and GE, OSI, and Philips for seeking the exceptions.” 

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
2015 MEP Giants: MEP Giants annual report; Mergers and acquisitions; NFPA 2001; Fiber-optic cables; LED specifications
Hospital IAQ: Indoor air quality in health care facilities; NFPA 72; Water use and conservation; Net-zero buildings
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.