New Products for HVAC Applications 7/05

07/28/2005


Copper tube fitting system for water and natural gas applications is said to save time by quickly and easily identifying unpressed connections. The patented indentation on the inside surface of the fitting ensures leakage of liquids and/or gases from the inside of the fitting past the sealing element of an unpressed fitting. The indentation is sealed during the pressing process, resulting in a leak-free permanent connection. For more about ProPress from Viega, click here .

HVAC products catalog is available in new Version 4.0, with more than 700 pagesmper actuators, and many more. For a free catalog from Siemens Building Technologies, click here .


Flexible hose has been designed for durability as a replacement for older polyester neoprene hoses. It is said to offer increased resistance to puncture, moisture and tear over earlier products, function at higher temperature ranges and is UL94HB flame retardant. The product is suited to oil mist, dust, smoke, fume and airborne particle collection applications.It withstands ozone, chemical, weather, U.V. and aqueous, oil or hydrocarbon-rich environments. For more information about AHPLUS from Air Handling Systems, click here .

Pressure transducer offers wide operating temperature range (-40applications. For more about Model 201 from Setra, click here .



Flow meter features a 316L stainless steel thermal mass flow sensing element with an all-welded, wetted surface in a 10 or 15 Ra electro-polish finish. Designed for demanding sanitary process applications in food, beverage, pharmaceutical, biotech, and chemical plants, the units support a wide range of gas flow measurement applications. They provide precise and repeatable gas flow measurement for high purity gas lines (e.g., CO2 and others), pill coater air flow monitoring, CIP and SIP flow and temperature monitoring, condenser/evaporator flow control, scrubber gas discharge monitoring and more. For more about FlexMASSter ST98 from FCI, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me