Light switches, plates made with antimicrobial copper surfaces

The Arrow Hart line of switches by Cooper Wiring Devices and wallplates feature CuVerro antimicrobial copper surfaces.

12/10/2012


The Arrow Hart line of switches by Cooper Wiring Devices and wallplates feature CuVerro antimicrobial copper surfaces. Courtesy: Cooper Wiring DevicesCooper Wiring Devices’ Arrow Hart line of switches and wallplates feature U.S. Environmental Protection Agency-registered CuVerro antimicrobial copper surfaces. Laboratory testing has shown that, when cleaned regularly, these surfaces deliver continuous and ongoing antibacterial action, effective in killing greater than 99.9% of bacteria within 2 hours. These alloys also offer specifiers a durable and attractive device design. The Arrow Hart line of wiring devices with new CuVerro touch surfaces material is designed specifically for areas where cleanliness is a concern. The line includes single, 3- and 4-way decorator switches as well as specification-grade, standard size wallplates in multiple gangs and configurations. All products have been tested and are compliant to UL standards and include EPA registered CuVerro antimicrobial copper surfaces. 

Cooper Wiring Devices

www.cooperwiringdevices.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me