Geothermal piping standard published

Geothermal piping systems standard NSF/ANSI 358-1, written by NSF International, evaluates safety and performance of polyethylene piping.

01/09/2013


NSF International has published NSF/ANSI 358-1, the first in a series of American National Standards for Ground-Source Geothermal Piping Systems. This new standard, which will be referenced in the 2015 International Mechanical Code, provides engineers, regulators, and users assurance that certified geothermal products meet minimum performance and safety requirements, reducing potential liability, and increasing confidence and product acceptance in the marketplace.

Geothermal heat pump systems provide heating or cooling by moving heat, rather than by creating heat such as conventional systems like furnaces do. While conventional heating systems rely on outdoor temperatures that may often vary, underground temperatures remain relatively constant; hence geothermal systems can produce the desired heating and cooling temperature year round.

Geothermal piping systems have gained popularity in recent years for residential and commercial building applications for their innumerable benefits such as low operating costs and environmental impact, long-term durability and ease of retrofitting. 

NSF/ANSI 358-1: Polyethylene Pipe and Fittings for Water-Based Ground-Source "Geothermal" Heat Pump Systems establishes minimum physical and performance requirements for geothermal piping system components, including long-term strength and quality control requirements that are key to ensuring product performance in the field. Additionally, the standard incorporates key requirements from standards developed by the American Society for Testing and Materials (ASTM), Canadian Standards Association (CSA), and the American Water Works Association (AWWA).



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.