Efficient development through physical modeling

B+R Automation and Maplesoft are integrating products to reduce costs and individual effort, time for simulation-based developments.

08/26/2011


B+R and Maplesoft will integrate products from both companies to save time, effort and cost for hardware-in-the-loop simulations.

Being able to design an adequate machine or system model plays an important role in simulation-based development. At the same time, mapping out all the dynamic characteristics of a machine can take a lot of time. "Tools for physical modeling such as MapleSim from Maplesoft provide optimal support and reduce the amount of time and work considerably," said Philipp Wallner, global technology manager at B+R. 

The open architecture of Automation Studio - B+R's programming and development software - reportedly ensures that physical models designed in MapleSim can be transferred to B+R controller hardware in just a few easy steps. The result is a hardware-in-the-loop simulation that emulates the machine's behavior in real time, in a completely safe testing environment.

“Using MapleSim, Automation Studio users can very quickly develop high-fidelity models of the control plant, analyze the dynamics, and then generate highly optimized real-time code for the plant,” said Dr. Laurent Bernardin, Vice President, Research and Development, Maplesoft. “By adding an easy-to-use and cost-effective physical modeling phase to the automation workflow, engineers will be able to increase virtual testing prior to hardware commitments. A definite way to reduce costly design errors.”

The close cooperation between the two companies ensures optimal integration in Automation Studio, a clear and comprehensive workflow, and long-term support for the user.

www.br-automation.com

www.maplesoft.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.