Consulting-Specifying Engineer 2015 Product of the Year finalists: Equipment-level sensors and controls

Read about the three finalists in the Equipment-level Sensors and Controls category for the Consulting-Specifying Engineer 2015 Product of the Year program.

04/06/2015


Armstrong Fluid Technology PSPCParallel sensorless pump control

Armstrong Fluid Technology’s PSPC is designed to provide intelligent orchestration of the full pump array using the combined pump performance map. To do so, PSPC deploys a fundamentally different pump staging concept called “best efficiency staging,” which constantly evaluates the optimal number of operating pumps and their ideal speeds against the pressure and flow requirements of the system. This allows the operator to control overall pumping efficiency across a parallel pumping configuration at any given time.

Armstrong Fluid Technology
www.armstrongfluidtechnology.com


Eaton ATC-900Automatic transfer switch controller

Eaton’s ATC-900 automatic transfer switch controller is designed to enhance communication between normal and backup power sources to ease management and increase power supply reliability. Intelligent control architecture allows the ATC-900 to meet a vast range of backup power system requirements. In addition, the controller provides flexibility for system expansion with cost-effective add-on modules that can reduce the need for investment in new controllers. The controller is available in one standard model that offers a variety of monitoring and control features including selective and automatic load shedding, remote load testing, and event logging to provide comprehensive transfer switch management.

Eaton
www.eaton.com


Electro Static Technology AEGIS iPRO-MR RingGrounding/monitoring ring with electrical bearing protection

The AEGIS iPRO-MR Ring combines electrical bearing protection with continuous monitoring of shaft voltage levels from a remote location—all in real time. The iPRO-MR is an AEGIS Shaft Grounding Ring and a shaft monitoring ring in one and is designed for large motors and generators in critical applications that cannot be easily monitored or maintained. With multiple rows of conductive microfibers completely surrounding the shaft, it provides millions of discharge points for harmful shaft currents and is ideal for high-current motors controlled by variable frequency drives, including low-voltage motors over 500 hp, medium-voltage motors, power generators, and OEM systems.

Electro Static Technology
www.est-aegis.com


Vote for the 2015 Product of the Year



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me