ASHRAE publishes new guideline for indoor environments

The new guideline considers interactions of air quality, thermal conditions, lighting, and acoustics especially for low-energy buildings.

03/30/2011


ASHRAE has published a new guideline to facilitate improved indoor environments by considering interactions of air quality, thermal conditions, lighting, and acoustics.

Spectrum HQs LobbyASHRAE Guideline 10-2011, Interactions Affecting the Achievement of Acceptable Indoor Environments, contains an assembly of knowledge on the complexity of indoor environments and the impact they have on building occupants.  Guideline 10 is especially significant in the design of low-energy buildings.

“The guideline summarizes what research and experience have taught us about the complex interplay of the wide range of factors that determine occupants’ reactions to the buildings they inhabit,” Hal Levin, chair of the committee writing the guideline, said.

The guideline is intended to help users understand existing documents dealing with indoor environments, including all applicable ASHRAE standards related to energy, ventilation, indoor air quality, and thermal conditions with a focus on the effect of these systems on occupants.

 “It can provide assistance to building design professionals and building operators by making them aware of the major interactions that have the potential to impact the indoor environment,” Levin said. “We believe the guideline will help draw attention to the narrowly-defined scopes of the widely-used standards and the significance of combined or interactive effects in determining the acceptability of an indoor environment.”

Visit the ASHRAE bookstore for more information.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me