ASHRAE Forum Examines Gray Water Use


Gray water, defined by some as recycled water for non-potable use, is gaining more and more attention in the building systems community, as illustrated in a forum that took place at the ASHRAE 2005 Annual Meeting last week in Denver, Colo.

One unified call from the ASHRAE members present at the forum, entitled "What You Need to Know About Grey Water Before it Can Be Used in HVAC Cooling," was for the industry to settle on a clear definition of the term gray water. While the U.S. Environmental Protection Agency defines it as tertiary treated municipal effluent, many members felt this definition was open to interpretation. For example, one member, representing an HVAC manufacturer, asked if there is a standard as far as chemical content for gray water, since OEMs “only have one chance to design the system right” in regards to filtering out certain chemicals. Another suggestion was that if different “categories” of gray water were to be defined, perhaps each category could have different uses within a building. One thing was made clear: gray water and storm water runoff are two different things.

As for HVAC application of gray water, cooling towers were touted as the most obvious choice, and using gray water as a heat source was also suggested. Gray water benefits mentioned included high availability, a much lower cost than potable water, the fact that potable water isn’t necessary for many HVAC applications and its usefulness in areas where other water sources are scarce or nonexistent. One member noted that while cooling tower systems aren’t able to cycle gray water as many times as potable water--three times compared to six to eight times, due to the particulates in gray water--using gray water could still potentially provide a payback. Of course, this potential usage begged the question, Will this change the way engineers design cooling tower systems?

On the flip side, there are a number of issues and drawbacks, notably, significant changes to chemical treatment and a common lack of plumbing infrastructure in most buildings. For example, if sewage treatment is performed onsite, a building wouldn’t need to bring in gray water as a separate water supply. Most buildings, however,

Further complicating matters are legal issues. Certain states, including Colorado, only allow water to be used once. However, there was some speculation that mindset could change in the future as water becomes scarcer.

Perhaps the most significant concern with gray water use is safety. While the idea of using gray water is becoming more accepted, one engineer expressed that at this point, he would only feel comfortable using it for irrigation purposes and would use storm water in the building systems. There weren’t many examples of U.S. usage of gray water, but moderator Mark Hodgson, LRSC, MIWSoc., director, Indoor Environmental Quality Occupational Health and Safety with Clayton Group Services, Edison, N.J., did point out that in certain world regions where water is scarce, such as Australia and Saudi Arabia, gray water use is prevalent. In these areas, purple dye—and often, purple pipes—is used to differential gray water from potable water (see Hydromancy? for more on Australian efforts in this area).

In the end, Hodgson said that engineers need to educate people on the technology. While safety concerns seem to be the main obstacle to gray water use, he said that engineering is a matter of solving a problem, and engineers need to keep solving this one step by step.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me