Top three advantages of LED lighting in health care

Sustainable engineering designs encourage cost savings and energy-efficient practices.

07/12/2017


High-quality LED products can last up to 20 times longer than any other artificial light source, reducing the time, cost, and effort of maintenance. Courtesy: Josh CalabreseA growing number of health care facilities are implementing light emitting diodes (LED) lighting systems within their organization as a way to foster a safe, healthy, comfortable, and green environment for patients and staff.

Advantages of LED lighting within health care include:

1. Optimal visibility

The even distribution of colors provided by LED lighting result in more saturated and vivid color renderings that work together to allow optimal visibility. Due to full directional down-lighting, LED provides more illumination on working surfaces, as opposed to the diffuse glow produced by gas-filled fluorescent tubes. The color temperature, color rendering, and efficiency of LED lights combine to improve visibility, which is a major contributing factor to an individual's level of satisfaction when receiving and responding to treatments. The higher levels of luminance delivered by LEDs ensure that details are not missed, even when lighting is dimmed.

2. Little to no maintenance expense and minimal downtime

In a typical hospital, lighting, heating, and hot water represent between 61 and 79 percent of total energy use depending on climate. These tend to be the best targets for energy savings. High-quality LED products can last up to 20 times longer than any other artificial light source, reducing the time, cost, and effort of maintenance. LEDs require minimal maintenance due to their longer lifecycle, disposal costs, and smaller physical size.

3. Energy efficient and sustainable

Hospitals that operate on tight budgets are nearly always looking for ways to save operating expenses so as to focus the budget on areas that will increase patient satisfaction. LEDs can save a healthcare facility up to 50 - 80 percent of its electricity bill, since LED lighting systems use 90 percent less energy depending on the type being installed. Known primarily for their energy efficiency, LED bulbs produce more lumens per watt, resulting in less power needed to produce more light output. LEDs are recyclable since they contain no mercury or mercury vapor-this results in zero hazardous waste and disposal expense, ensuring employees and patients aren't exposed to any hazardous elements.

This article originally appeared on RTM's website. RTM engineering is a CFE Media content partner. Edited by Hannah Cox, content specialist, CFE Media, hcox@cfemedia.com.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me