Would You Like to Super-Size That?

02/11/2005


Editor’s note: State-of-the-art baggage-handling systems are having a major impact on the design and renovation of today’s airport construction, as described in the February edition of CSE. These systems, in turn, are being impacted by the size of today’s aircraft.

A major change facing airport designers today is simply the size of aircraft. With the growing presence of regional jets, along with the looming presence of the new 500-plus-passenger, double-decker Airbus 380, airport managers have to make sure their facilities are adaptable to a growing range of aircraft sizes.

The Airbus 380 will probably pose the biggest problems for the large hub airports that serve as gateways for international passengers who may be traveling on to other U.S. facilities. The aircraft may require new gate and bridge configurations to handle their increased size.

“I compare [the Airbus 380] to the introduction of the 747 in the 1970s,” says David Schlothauer, senior vice president of Parsons Brinkerhoff Aviation. “There are only a few airports in the country that can accommodate the potential double-level loading and its width and depth for taxiing and parking.”

Regional jets pose different challenges. These efficient, smaller aircraft are creating easier access to air travel for many smaller markets. However, because of their smaller passenger loads, the per-aircraft revenue to the airport is much smaller. Additionally, they sit lower to the ground than the aircraft traditional jetways are designed to handle.

As a result, loading and deplaning may need to be ground-based. Where bridges are used, they need to be longer than typical in order to accommodate Americans With Disabilities Act requirements. Strategies for gate-checked baggage—a more-common request with passengers of these jets—also have to be worked out where bridges are used. Schlothauer mentions Louisville, Kentucky’s use of a new regional-jet bridge system that incorporates a baggage lift to raise luggage up from ground level to the passenger bridge.





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me