VFDs Control Costs for Cement Plant

The commissioning and start-up of a Lone Star Industries cement plant in Greencastle, Ind., last June marked the introduction of the semi-dry cement-making process in the United States.

01/01/2001


The commissioning and start-up of a Lone Star Industries cement plant in Greencastle, Ind., last June marked the introduction of the semi-dry cement-making process in the United States. It is because of good availability of relatively inexpensive electricity, and the plant's energy efficiency and ability to use alternate fuels for producing clinker that make it competitive with dry-process facilities.

According to Robert Brown, electrical supervisor at the Greencastle plant, the need to maximize capacity and uptime challenged the plant electrical engineers to manage and maintain all electrics for efficient, around-the-clock production. A standard AC variable-frequency drive (VFD) powers motors ranging from three horsepower (hp) up to 800 hp. Six 150-hp drives control the slurry pumping stations and feed pumps into the kilns, while 600-hp drives power the primary air fan and baghouse cooler exhaust. VFDs also control the primary exhaust fan, and a 200-hp drive runs the separator in the finish mill. Smaller motor controllers are used on fuel-feeding applications, such as the alternate pump and agitator, as well as on the feeder from the primary rock crusher to the conveyor at the quarry site.

"The same types of drives are used to control these motors' different functions," says Ross Tennis, chief electrician at the plant. He points out that the standardized operating platform for drives means less training for electrical technicians and fewer mistakes. Using VFDs that control motors to the exact rpm needed has proven to be an efficient, energy-saving approach.

For more information about VFDs and motors from ABB Automation Inc., circle 101 on the Reader Service Card on page 77.





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
June 2018
Chilled-water system design, NFPA 99, Grounded power supply systems
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me