USGBC Issues Final Report on PVC

03/08/2007


The Technical and Scientific Advisory Committee (TSAC) of the U.S. Green Building Council (USGBC), Washington, D.C., has issued its final report to the organization’s LEED Steering Committee on the technical and scientific basis for a PVC-related credit within the LEED green building rating system.

TSAC’s draft report for public comment was presented in December 2004. Based on the extensive comments and white papers that were submitted in response to the draft report, TSAC expanded its analysis to address concerns and new data raised during the process, including end-of-life issues such as backyard burning and landfill fires. Burning PVC releases dioxins—highly carcinogenic, persistent toxins that are a threat to human health.

The original charge to the committee was to review the evidence offered by stakeholders and independent sources, and advise the LEED Steering Committee on the availability and quality of evidence as a basis for a reasoned decision about the inclusion of a PVC-related credit in LEED. Malcolm Lewis, chairman of TSAC, expounded, “To do so, we investigated this question: For the applications studied, does the available evidence indicate that PVC-based materials are consistently among the worst of the alternative materials studied in terms of environmental and health impacts?”

Lewis continued, “Through the course of our intense research and study, however, we concluded that a simple yes or no answer to this question was not adequate, and a more nuanced answer which points the way to dealing with some larger issues was essential.”

In order to apply TSAC’s findings to a decision about credits within LEED, the report points to a series of policy issues raised through TSAC’s research. These issues include:

  • How should risks to human health and risks to the natural environment be reconciled?

 

  • Should LEED offer credits for avoiding less desirable materials, or create credit incentives for the use of preferable, often innovative alternative materials or processes?

 

  • Should LEED address individual materials through its credits, or should it focus on areas of impact?

“With the report in hand, the LEED Steering Committee, which has received the report simultaneous to its release to stakeholders and the media today, will begin review of the report and its recommendations, determine which policy issues to address first, and engage USGBC’s Board of Directors in that process,” said Scot Horst, chairman of the LEED Steering Committee.

“The publication of the final TSAC report on PVC concludes one process and begins another. To that end, the LSC is meeting to begin developing a plan and timeline for USGBC’s next steps,” said Horst.

Horst noted that any significant changes to LEED credits that may result from this process will follow USGBC's consensus process, including public comment and USGBC member ballot.

The PVC issue was referred to TSAC in 2002 in response to a proposal to add a LEED credit for avoiding the use of PVC which was being discussed by USGBC members serving on the LEED for Commercial Interiors development committee.

“Since then, our volunteer committee members have given generously of their time and expertise to tackle this important issue,” said Tom Hicks, USGBC’s vice president of LEED.

Over the course of their work, TSAC analyzed life cycle assessment, occupational exposure, end-of-life toxicity, risk assessment and combined LCA and risk assessment. As a part of this process, TSAC reviewed more than 2,000 documents, all of which are now posted on a database on USGBC’s website. Public comments and a peer review were also incorporated into the report. Public comments are also posted publicly at www.usgbc.org , and the results of the peer review are included in the final report.

Hicks noted, “USGBC recognizes that there are both strong environmental and human heath concerns, as well as significant industry and financial interests, at stake. We will need to continue to work closely with advocates on all sides of this issue to move forward and respond to the larger questions raised through TSAC’s report.”

“Clearly, a commitment to research must be a component of USGBC’s leadership agenda, and a priority for the whole of the building industry” said S. Richard Fedrizzi, USGBC’s president, CEO and founding chairman.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me