UPS with integration, graphic display

The MGE EPS8000 UPS from APC by Schneider Electric has been upgraded with a touch screen and integrated parallel feature.

02/23/2012


APC by Schneider Electric upgraded its MGE EPS8000 uninterrupted power supply (UPS) product family to include a new Integrated Parallel feature, allowing customers to easily configure 3+1UPS models without a centralized static switch cabinet. Additionally, the upgrade incorporates a new, touch screen-capable 12 in. graphical display, enhancing the product’s flexibility and usability. Each MGE EPS8000 Integrated Parallel module comes equipped with local paralleling boards that communicate with each other to create a completely synchronized output voltage. UPS controls reside in each MGE EPS8000 Integrated Parallel module, rather than in a centralized location or switchgear. When one module is removed from the parallel bus for service or an internal failure, this unique feature enables the remaining UPS modules to immediately accept the load of the failed UPS module. By enabling one module to be removed without requiring the critical load to be connected to straight utility, this feature mitigates system downtime and improves efficiency.

www.schneider-electric.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me