Uninterruptible power supply

APC adds parallel capabilities to the Symmetra PX three-phases modular and hot scalable uninterruptible power supply (UPS), delivering up to 2 MW of power protection, 1.5 MW in system level redundancy.

03/03/2011


APC announced new parallel capabilities of the Symmetra PX 250/500kW three-phase modular and hot scalable uninterruptible power supply (UPS). This new firmware ships standard on all Symmetra PX250/500kW units, which can now be paralleled to deliver up to 2 MW of power protection or 1.5 MW in a system level redundancy (N+1) configuration. The Symmetra PX250/500 kW provides scalability and availability up to 2000 kW. The Symmetra PX250/500 kW offers a modular, hot-scalable system consisting of redundant modules: power, intelligence, battery, and communications. Each system is scalable in 25 kW increments up to 500 kW with the ability to run up to four systems in parallel to provide 2 MW of redundant power protection. The architecture reportedly gives IT managers the ability to right-size power and runtime as demand grows or as higher levels of availability dictate.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me