UL-listed 100-600-amp fuses

The fuses are suitable for applications that need Class L fuse dimensions with ampere ratings of less than 601. Plant and consulting engineers can use the fuses to comply with stringent OSHA regulations and NEC standards.

02/20/2008


A4BQ 100-600 fuses from Ferraz Shawmut aresolidating; and meeting arc flash mitigation needs. Specifying engineers have the flexibility to specify a single fuse for all new construction applications, and contractors can install and operate Class L service entrance equipment and switchgear on new or unfinished developments requiring less than 600 amps of load. For more about A4BQ fuses from Ferraz Shawmut, click here .





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
January/February 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me