Top Consulting-Specifying Engineer Articles, March 2012

The most visited articles at www.csemag.com during March 2012 include changes in the NEC, how to save water in commercial buildings, LEED changes, analyzing the lifecycle of HVAC systems, and active high-speed switching mitigating arc flash.

04/03/2012


March 2012's leading Consulting-Specifying Engineer articles include:


Key Changes In The 2011 NEC

Kenneth Lovorn explains and highlights changes made to the NEC code in 2011 and how they affect engineers.

10 Ways to Save Water in Commercial Buildings

Mark Spigarelli outlines 10 ways engineers can save water across both mechanical and plumbing systems within commercial buildings. 

LEED 2012 Anticipated Changes

Edna Lorenz and James K. Vallort explain how performance accountability and design integration are key elements of the likely changes to the LEED standards for credits.

Figure 3: This photo of a healthcare facility switchgear rear cable compartment shows a close-up view of the phase run-back with the bus cover panel resting on the phase bus. Courtesy: Schneider ElectricActive High-Speed Switching Can Mitigate Arc Flash

Michael Divinnie and James Stacy write about how innovative solutions, operator training, and safe work practices are being used to address arcing-fault hazards in medium-voltage switchgear.

Analyze The Lifecycle Of HVAC Systems

Cole Roberts, Andrew Rhodes, and Alexander Hespe write about how performing a series of cost analyses when designing HVAC systems is an economically justifiable method for selecting the appropriate design solution.



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me