Top 5 Consulting-Specifying Engineer Articles, September 4-10: ASHRAE, developing a circuit schedule, MEP Giants, and more

ASHRAE, developing a circuit schedule, MEP Giants, LEDs, and HVAC codes and standards were Consulting-Specifying Engineer's five most clicked articles from last week, September 4-10. Were you out last week? You can catch up here.

09/11/2017


Consulting-Specifying Engineer's top 5 most read articles online, for September 4-10, covered ASHRAE, developing a circuit schedule, MEP Giants, LEDs, and HVAC codes and standards. Link to each article below.Top 5 Consulting-Specifying Engineer Articles, September 4-10

1. ASHRAE 62.1: uncommon calculations, approaches

ASHRAE Standard 62.1 is best known for its regulation of the amount of ventilation air delivered to each space by HVAC systems through its ventilation-rate procedure approach to system design. ASHRAE 62.1 offers many calculations and performance approaches.

2. Developing a circuit schedule

Circuit protection, as defined by NFPA 70: National Electrical Code, can be interpreted in many ways, depending on building load and use. Electrical engineers should design a circuit schedule that can be used on the project.

3. MEP Giants revenue increases, along with staffing concerns

The 2017 MEP Giants gross revenue increased as compared with last year, likely due to company mergers and larger and more varied projects. MEP/FP design revenue also increased.

4. Your questions answered: Lighting: Designing lighting systems with LEDs

The Aug. 17, 2017, “Lighting: Designing lighting systems with LEDs” webcast presenters addressed questions not covered during the live event.

5. Four strategies for implementing ASHRAE 62.1 in HVAC systems

There’s room in ASHRAE 62.1 to improve energy efficiency in a commercial ventilation system.

This list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, September 4-10, for articles published within the last two months.


Sierra Grayson, Production Coordinator, CFE Media, sgrayson@cfemedia.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me