Top 5 Consulting-Specifying Engineer Articles, October 31-November 6: Condensation and condensate, high-efficiency hot-water systems, low-temperature water-heating options, more

Articles about condensation and condensate, designing high-efficiency hot-water systems, low-temperature water-heating options, the engineer shortage, and the recipe to become a principal engineer were Consulting-Specifying Engineer's five most clicked articles from last week, October 31-November 6. Were you out last week? You can catch up here.

11/07/2016


Consulting-Specifying Engineer's Top 5 most read articles online, for October 31- November 6, covered evaluating condensation and condensate, designing high-efficiency hot-water systems, evaluating low-temperature water-heating options, the engineer shortage, and the recipe to become a principal engineer. Link to each article below.

1. Evaluating condensation and condensate

Learn methods to capture, control, dispose, and derive the condensation requirements within HVAC systems.

2. How to design high-efficiency hot-water systems for hospitals

Boilers for heating and domestic hot-water systems are used in many hospitals and health care facilities. This looks at the codes and standards that regulate boiler specification, plus energy efficiency and efficacy of hot-water heating systems.

3. Evaluating low-temperature water-heating options

To take advantage of HVAC energy savings, engineers must change their thinking on heating-water temperatures, as the trend drives toward greater sustainability.

4. The coming engineering shortage

The engineering industry must address the skills gap.

 

5. The recipe to becoming a principal engineer

Start developing your skill set early. The engineering industry must address the skills gap.

Brana Webb, production coordinator, CFE Media, bwebb@cfemedia.com.



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me