Top 5 Consulting-Specifying Engineer Articles, November 27-December 3: Designing electrical rooms, salary survey responses, designing medical buildings, and more.

Designing electrical rooms, salary survey responses, designing medical buildings, safety webcast unanswered questions, and the 2016 Electrical & Power Study were Consulting-Specifying Engineer's five most clicked articles from last week, November 27-December 3. Were you out last week? You can catch up here.

12/01/2017


Top 5 Consulting-Specifying Engineer Articles, November 27-December 3Consulting-Specifying Engineer's top 5 most read articles online, for November 27-December 3 covered designing electrical rooms, salary survey responses, designing medical buildings, safety webcast unanswered questions, and the 2016 Electrical & Power Study. Link to each article below.

1. Your questions answered: Electrical systems: Designing electrical rooms

2. Salary survey responses remain positive

Job satisfaction is up while company training programs are down. Read this year’s salary survey to find out where you and your company stand against others in your field.

3. How to design medical buildings: HVAC and automation systems

Hospitals and health care buildings have become very sophisticated. Coordination among all parties, special attention to codes and standards, and a focus on patient comfort have each become highly important to engineers. HVAC system design contributes to indoor air quality, indoor environmental quality, and general health.

4. Your questions answered: An NFPA 70B and 70E Overview: Eliminate the Risk of Electrical Hazards and Avoid Expensive Shutdowns

The Oct. 25, 2017, “An NFPA 70B and 70E Overview: Eliminate the Risk of Electrical Hazards and Avoid Expensive Shutdowns” webcast presenter addressed questions not covered during the live event.

5. 2016 Electrical & Power Study

Electrical, power systems in office buildings

This list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, November 27-December 3, for articles published within the last two months. 

Sierra Grayson, Production Coordinator, CFE Media, sgrayson@cfemedia.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Developing lighting solutions; Designing lighting systems; Integrating fire alarm and HVAC systems
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me