Top 5 Consulting-Specifying Engineer Articles, January 1-7: 2017 HVAC study, designing fire protection systems, using various power sources, and more

The 2017 HVAC study, designing fire protection systems, using various power sources, simplifying code compliance for lighting, and integrating fire alarm and HVAC sytems were Consulting-Specifying Engineer's five most clicked articles from last week, January 1-7. Were you out last week? You can catch up here.

01/08/2018


Top 5 Consulting-Specifying Engineer Articles, January 1-7Consulting-Specifying Engineer's top 5 most read articles online for January 1-7 covered 2017 HVAC study, designing fire protection systems, using various power sources, simplifying code compliance for lighting, and integrating fire alarm and HVAC sytems. Link to each article below.

1. 2017 HVAC, building automation systems study

Here are five HVAC and BAS findings as they relate to educational facility projects.

2. Designing passive and active fire protection systems

Fire protection engineers should consider the building's construction, fire suppression systems, and smoke control when designing active and passive fire protection systems. The International Building Code and NFPA standards provide guidance on passive and active fire protection systems.

3. Energy generation: using various power sources

Despite (or as a result of) the economic downturn, the use of renewable energy options have grown over the past several years, supported by federal and state programs including federal tax credits, state renewable portfolio standards, and a federal renewable fuels standard.

4. How to simplify code compliance for lighting projects

Asking key questions will ease the process of complying with required energy codes.

5. How to properly integrate fire alarm systems and HVAC systems

Organizing the coordination with the engineering team is key to a successful system integration project.

This list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, January 1-7, for articles published within the last two months.

Sierra Grayson, Production Coordinator, CFE Media, sgrayson@cfemedia.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Developing lighting solutions; Designing lighting systems; Integrating fire alarm and HVAC systems
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me