Top 5 Consulting-Specifying Engineer Articles, December 4-10: Performing PV feasibility studies, changes to NFPA 20, salary survey responses, and more.

Performing PV feasibility studies, changes to NFPA 20, salary survey responses, 2016 Electrical and Power study, and strategies for electrical labeling were Consulting-Specifying Engineer's five most clicked articles from last week, December 4-10. Were you out last week? You can catch up here.


Top 5 Consulting-Specifying Engineer Articles, December 4-10Consulting-Specifying Engineer's top 5 most read articles online, for December 4-10 covered performing PV feasibility studies, changes to NFPA 20, salary survey responses, 2016 Electrical and Power study, and strategies for electrical labeling. Link to each article below.

1. Performing PV system feasibility studies correctly

Solar PV interconnection agreements can drive up the cost of solar installations.

2. Proposed changes to NFPA 20-2019

The potential changes to the 2019 edition of NFPA 20 could have a great impact on fire protection systems for high-rise buildings.

3. Salary survey responses remain positive

Job satisfaction is up while company training programs are down. Read this year’s salary survey to find out where you and your company stand against others in your field.

4. 2016 Electrical & Power Study

Electrical, power systems in office buildings

5. Strategies for electrical labeling and documentation

The following suggestions can help electricians do their work.

This list was developed using CFE Media's web analytics for stories viewed on, December 4-10, for articles published within the last two months.

Sierra Grayson, Production Coordinator, CFE Media,

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Developing lighting solutions; Designing lighting systems; Integrating fire alarm and HVAC systems
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me