Top 10 ways to commission for LEED

The requirement for commissioning as part of the LEED certification process has elevated the commissioning consultant to a key player in achieving certification.

08/13/2008


In the summer edition of The Checklist , published by the Building Commissioning Association , Michael Mantai, president of SystemWorCx LLC, offers his top 10 issues when commissioning existing buildings for LEED.

The highlights:
10. Energy Recovery Ventilators (ERV)
9. Plumbing Fixtures
8. Protection of Ductwork
7. Occupancy Sensors
6. ASHRAE 62.1-2004 Compliance
5. Measurement & Verification (M&V)
4. Outdoor Air Flushout
3. MERV-13 filters
2. Owner’s Project Requirements
1. Basis of Design





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me