The difference between mounting and installing

Even in the dictionary, the term mounting is not the same as installing.

12/27/2016


Even in the dictionary, the term mounting is not the same as installing.Even in a dictionary, the words "mounting" and "installing" are not the same. According to the American Heritage Dictionary, 5th edition, the term mounting is a noun that means "something that serves as a support, setting, or backing." On the other hand, the term installing comes from the verb install and is defined as, "to connect or set in position and prepare for use."

In plain English, an example of a mounting is an object, such as a frame, to which a piece of equipment, such as an air-handling unit (AHU), is bolted. The act of affixing the AHU to the frame is called installing the unit onto the mounting.

Why is it important to differentiate between these two seemingly similar terms? Because all too often in project specifications, mounting and installing are used interchangeably-or mounting is removed in favor of installing. As shown above, these terms are two different things. In specifications, describing the mounting to which the equipment will be affixed is a separate matter from the act of installing the equipment onto the mounting. In a BIM model, the equipment is installed on a mounting, which could be a concrete foundation, a manufacturer curb, or a steel support structure.

Based off of the AHU example, project specifications for a unit may have to specify either an integral mounting assembly or a separately fabricated frame. The mounting itself may need to meet certain seismic or wind-load requirements, whereas installing the equipment may need to meet specific conditions. For instance, the alignment of the mounting and the bolt torque of the bolts attaching the AHU may need to be verified.

Even in a BIM world, this is still an important distinction to make. The difference between the words mounting and installing should be appreciated to make sure that customer requirements are being met. 


-Michael Heinsdorf is an engineering specification writer at ARCOM MasterSpec. He has more than 10 years of experience in consulting engineering and is the lead author of MasterSpec Electrical, Communications, and Electronic Safety and Security guide specifications. ARCOM is a CFE Media content partner.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me