Sylvania Lights Up Baltimore's Westside



Where abandoned buildings once stood, Baltimore’s Westside is making a colossal comeback. The Stewart’s Building is one of the cornerstone developments in the rebirth of Baltimore’s Westside.

The main goal of The Harry and Jeanette Weinberg Foundation, Owner/Developer of the Stewart Buildings, was to take the mostly-vacant remains of an old department store and create a quarter million square foot high-technology office environment and ground-level retail space. Furthering Baltimore’s efforts to retain and attract jobs in the City’s existing urban core.

The Philadelphia based lighting design firm, The Lighting Practice, enlisted the expertise of OSRAM SYLVANIA Commercial Engineer Dirk Hinterleiter and SYLVANIA lighting products to add appeal to the renovation project and to ensure that future tenants and pedestrians feel safe.


“The building’s aesthetics were our primary concern when developing our lighting scheme,” said Michael Barber, lighting designer and principal of The Lighting Practice.

A second concern was energy consumption and conservation.To extend lamp life and minimize energy consumption Barber specified a dimming system with preset scenes that coincided with specific hours of the day.

“SYLVANIA lamps provided the mix of convenience, aesthetics, and performance that we had to have in order to fill the unique lighting needs for the historic Stewart’s Building,” Barber said. “Accenting the building’s architectural design while keeping energy usage low was a major challenge; SYLVANIA was the best choice for the project at hand.”

The renovation of the Stewart’s Building has spearheaded a dramatic change in the landscape of Baltimore’s historic West Side.

“Before the renovation, this building, especially at night, sat as a darkened hulk that was almost hostile to the street environment,” said Tom Liebel of Design Collective, the architecture firm responsible for the project. “The subtle uplighting of the structure and the lighting of the new additions make the building seem incredibly light and ethereal at night.It has a wonderful glow that is just mesmerizing to watch.”

*This project is currently in the final stages of obtaining LEED certification from the U.S. Green Building Council.


Interior Lighting:

%%POINT%%The linear wall wash fixtures mounted at the top of the curving wood wall and granite wall that flanks the reception desk use SYLVANIA CAPSYLITE IRÒ60-watt PAR 38 spots.

%%POINT%%The decorative glass panels at the ceiling are backlit using CAPSYLITE IR 45-watt PAR38 floods.

%%POINT%%Downlight cylinders in the high lobby space use CAPSYLITE IR 60-watt PAR38 narrow floods.

%%POINT%%To create the backlit glow above the glass canopy around the reception desk we use more of the CAPSYLITE IR 45-watt PAR lamps.

%%POINT%%Concealed accent lights in the exterior canopy use SYLVANIA METALARC POWERBALL 39-watt PAR20 ceramic metal halide floods, providing focus to the lobby/building entrance.

%%POINT%%In the future retail space on the first floor of the existing building, 4-inch aperture downlights lamped with SYLVANIA DESIGNERÒPAR16 narrow floods provide accent on the columns.

Exterior Lighting:

%%POINT%%The light fixtures at the base of the larger pilasters (approximately 42’ high) are grazed with light from SYLVANIA AR111 100-watt low-voltage aluminized reflector spots.

The columns in the center decorative section are illuminated with 75-watt AR111 spots.

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me