Suction diffuser line expanded

Taco has expanded its suction diffuser line, which provide maximum flow efficiency at the suction inlet of the pump while at the same time reducing space and fitting requirements.

04/23/2014


Taco has expanded its suction diffuser line, which provide maximum flow efficiency at the suction inlet of the pump while at the same time reducing space and fitting requirements. Courtesy: TacoTaco has expanded its suction diffuser line with three new sizes: 4x2.5-in., 5x3-in., and 8x5-in.. Taco's suction diffusers incorporate numerous features into one device to provide maximum flow efficiency at the suction inlet of the pump while at the same time reducing space and fitting requirements. They also eliminate the need for an equivalent length of 10 pipe diameters of straight run on the suction side of the pump. The integral cast straightening vanes ensure uniform flow to the suction inlet of the pump while the oversized body cylinder ensures minimal pressure drop. The suction diffuser's metering port allows for the monitoring of system conditions. The devices are available for 125 or 250 psi working pressures, with either flanged or grooved-flange connections.

Taco

www.taco-hvac.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me