Steam plant decentralization project

09/15/2010


In 2004, Sandia National Laboratories, located at the Kirtland Air Force Base in Albuquerque, N.M., began researching what would be required to decentralize the steam plant that has been in use on the base for years. Due to the high cost of maintaining the steam system, the goal of the Heating System Modernization program was operational efficiency. Since 1949, Sandia National Laboratories has developed science-based technologies that support national security. Sandia is a government-owned/contractor operated (GOCO) facility. Sandia Corp., a Lockheed Martin company, manages Sandia for the U.S. Dept. of Energy’s National Nuclear Security Administration.

Engineers at Sandia National Laboratories worked with a local Albuquerque engineering firm, Bridgers and Paxton, to conduct a study to determine the best approach for the decentralization project. As the team of engineers evaluated the situation and considered different options, it turned to the Socha Co., which had previously supplied hydronic and domestic water heat equipment for new construction projects at the Sandia National Laboratories.

The Socha Co. recommended Lochinvar units for the decentralization project because of the boilers’ footprint, the ease of installation, high efficiency, and the unit’s ability to coordinate with the controls of the building management system used by Sandia National Laboratories.

In 2006, the engineering team selected EEA Consulting Engineers in Austin, Texas, to design the entire decentralized system. The engineers from EEA and Sandia National Laboratories met with the technical team at the Lochinvar factory in Lebanon, Tenn., to review specifications, controls, and delivery. After the meeting, the engineers decided that the project required 111 boilers during installation.

Construction began in 2007 and during that year 22 buildings were taken off the central steam plant. Boilers were installed in each building or, in some cases, a boiler plant for a group of buildings. One of the larger heating plants features 12 Power-Fin PBN2001 boilers, and the initial phase of the project required a total of 53 Lochinvar KNIGHT and Power-Fun boilers.

In 2008, the team installed 32 more KNIGHT and Power-Fun boilers, and the job was completed in 2009 when the last 26 Lochinvar units were installed. In total, the project converted 47 buildings from the centralized system to local boilers. The new heating system will save nearly 12 million gallons of water per year and will reduce both energy usage and pollutants by 60% from previous levels.

The 18,000-sq-ft steam plant was demolished in May 2010, which marked the end of the Heat System Modernization program at Sandia National Laboratories.

Information provided by Lochinvar.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me