Stainless steel pressure transducer for industrial applications, engine test stands

Omega Engineering’s PXM309 Metric series transducers report a static accuracy of 0.25% and 1% total error band over a range of -20 to 85 C.

06/27/2011


Omega Engineering PXM309 Metric series transducers. Courtesy: Omega Engineering Inc.The PXM309 Metric series reportedly has an exceptional static accuracy of 0.25% and a 1% total error band (TEB) over a compensated range of -20 to 85 C (on ranges of 1 to 700 bar). Ranges from 70 mbar to 3.5 bar are also available with a slightly larger TEB. All units are supplied with a 5-point NIST traceable calibration certificate. The all stainless steel construction and solid state reliability make these transducers suitable for most industrial applications as well as engine test stands. The PXM309 Series transducers are sealed to an IP65 environmental rating and are available with 3 electrical terminations, a 2 m cable with flying leads, a mini-DIN connector or a 4-pin M12 connector. Two outputs are available, either 0-10 Vdc or 4-20 mA. The pressure connection is a standard G ¼ male metric fitting.

Omega Engineering Inc.

www.omega.com

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me