Stainless steel boiler line

Bosch Rexroth's Buderus SSB Series is designed with stainless steel construction and includes condensing technology in four separate chassis sizes.


Bosch Rexroth's Buderus SSB Series is designed with stainless steel construction and includes condensing technology in four separate chassis sizes. Courtesy: Bosch RexrothBosch Rexroth's Buderus SSB Series is a stainless steel boiler with condensing technology which consists of eight models in four chassis sizes with inputs ranging from 85 to 1,024 MBH. The SSB Series is applicable for small studio units as well as commercial buildings. These boilers can be cascaded and feature a proprietary ASME SA-240 stainless steel-type 316L heat exchanger and an integrated premix burner as well as a pneumatic air-gas system for optimized combustion. They have a 5:1 turndown, an onboard control with weather compensation, modbus connectivity, a two-wire cascades link, and terminal wiring. The boilers also feature a factory-installed low-water-cutoff (LWCO) and safety temperature high limiter with a manual reset to speed installation.

Bosch Rexroth 

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me